Driving Belt: V-Belt.
Bed: 5-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel.
Tread Rollers 16" BF: 1-3/8" diameter x 18 gauge galvanized steel roller with 5/16" hex shaft on 1-1/2" centers for 16" between frame
Tread Rollers 22" BF: 2-1/2" to 1-11/16" diameter tapered rollers with 7/16" shaft for 22" between frame.
Pressure Sheaves: 3" diameter x 3/8" bore, adjustable to give required driving force.
Floor Supports: Adjustable from 30" to 44", measured from floor to top of roller. Each conveyor supplied with one support at each end.
|
Tangent: 12" long, one on each end with straight rollers.
Take-Up: Screw take-up provided to ensure proper V-Belt tension. Mounted underneath 90 degree roller conveyor.
Bearings: Sealed and prelubricated with cast iron housing.
Motor: 1/2 HP 230-460-3-60 totally enclosed.
Belt Speed: 60 feet per minute, constant speed.
Finish: Green Powder Coat Finish.
|
