Phone: 800-969-0779

Home Page - www.dcgraves.com

Home: www.dcgraves.com

Fax: 781-245-8877

E-Mail: sales@dcgraves.com

Back To  -  Steel Skatewheel - Index

Series #SS10  -  Steel Skatewheel  -  Accessories

Angle Stop

Portable Support Kits
Straight Sections

Channel Guard Rail - Adjustable
Multi-Tier Supports

Portable Support Kits
Curve Sections

Optional Colors
Ceiling Hangers

Angle Guard Rail - Fixed

  

Gate Hardware Kits

Channel Guard Rail - Fixed

 

 

Angle Stops

Bolt-On Angle Stop, 1-1/2" x 1-1/2" x 12 gauge steel, includes all mounting hardware. Typically mounted at the end of a conveyor run to stop product from falling off the conveyor.
Model Over-All Conveyor Width Price
#AS-11

12", 15", 18", 24"

$13.00

Back To Top

Multi-Tier Supports

Application - Can be used with series SR10 to SR50.

Widths - Conveyor widths up to 42" between frame.

Capacity - 3000-pounds capacity per set of uprights,
1500-pounds per cross supports.

Versatility - Infinite adjustability.

No. of Levels - Two levels as standard.

Price includes support legs, cross supports with mounting plates and knee braces.
Model Number Maximum Height Price
MT-48 48" $89.00
MT-60 60" $93.00
MT72 72" $97.00
Cross support and mounting plates required for one additional level.  $17.00

Back To Top

Ceiling Hangers

Application - Can be used with series SR10 to SR50.

 

Ceiling hangers provide an economical and safe means of utilizing valuable floor space when higher conveyor elevations are required. Equipped with 1/2" diameter x 8' long galvanized  thread rods (with locking nuts) and 1-1/2" diameter standard pipe which bolts to underside of conveyor frame with pipe collars. Ceiling hangers can be used with gravity or powered conveyors.

 

Guard rails are required on ceiling hung conveyors.
Model Price
#CH  $39.00

Back To Top

Manual or Spring Balanced Gate Hardware Kit

For use with Series SR10

Conveyor Width - 12", 15", 18" and 24"

Conveyor Length - 5' long maximum

Latching - Safety gate latch

Pricing is for gate hardware only, add the model of the gate hardware kit to the end of a section of skatewheel conveyor you plan to use as your gate. Spring balanced gates will be factory attached to that section.
Model Gate Type Pricing
ML-01 Manual Lift $48.00
SB-01 Spring Balanced  $292.00

Back To Top

Portable Support Kits Straight Sections

Application - Can be used with all skatewheel conveyors and certain roller conveyors.

Portable Support with Casters allows straight sections of gravity skatewheel or 1-3⁄8" diameter roller conveyor to be easily moved from one area to another. Equipped with four 4"diameter hard rubber swivel casters with brake.

Optional Floor locks: $122.00 Per Pair
Model
12" Wide		 Model
15" Wide		 Model
18" Wide		 Model
24" Wide		 Weight Height Range Price
PSC-12-28 PSC-15-28 PSC-18-28 PSC-24-28 53-lbs. 18" to 28" $175.00
PSC-12-40 PSC-15-40 PSC-18-40 PSC-24-40 55-lbs. 24" to 40" $182.00
PSC-12-52 PSC-15-52 PSC-18-52 PSC-24-52 57-lbs. 30" to 52" $188.00
PSC-12-72 PSC-15-72 PSC-18-72 PSC-24-72 62-lbs. 40" to 72"  $199.00

Back To Top

Portable Support Kits Curved Sections

Application - Can be used with all skatewheel conveyors and certain roller conveyors.

Portable Castered Support allows curved sections of gravity skatewheel or 1-3⁄8" diameter roller conveyor to be easily moved from one area to another. Equipped with four 4"diameter hard rubber swivel casters with brake.

Optional Floor locks: $122.00 Per Pair

Model
12" Wide

 Model
15" Wide		 Model
18" Wide		 Model
24" Wide		 Weight Height Range Price
PCC-12-28 PCC-15-28 PCC-18-28 PCC-24-28 75-lbs. 18" to 28" $197.00
PCC-12-40 PCC-15-40 PCC-18-40 PCC-24-40 77-lbs. 24" to 40" $204.00
PCC-12-52 PCC-15-52 PCC-18-52 PCC-24-52 79-lbs. 30" to 52" $210.00
PCC-12-72 PCC-15-72 PCC-18-72 PCC-24-72 84-lbs.  40" to 72" $221.00

Back To Top

Angle Guard Rail - Fixed

Fixed Angle guard rail, 1" x 1" x 12 gauge galvanized steel, includes all mounting hardware. Angle legs turned out, for angle legs turned in add 50% to below pricing for counter sunk holes.
Model Description Price
#AGR-11 Straight Section - Both Sides $3.25 per foot
#AGR-12 90 Degree Curve - Both Sides $40.00 per Curve
#AGR-13 90 Degree Curve - Outside Only $25.00 per Curve
#AGR-14 90 Degree Curve - Inside Only  $15.00 per Curve

Back To Top

Channel Guard Rail - Fixed

Fixed Channel guard rail, 2-1/2" x 1" x 12 gauge galvanized steel, includes all mounting hardware. Angle legs turned out, for angle legs turned in add 50% to below pricing for counter sunk holes.
Model Description Price
#CGR-11 Straight Section - Both Sides $10.00 per foot
#CGR-12 90 Degree Curve - Both Sides $80.00 per Curve
#CGR-13 90 Degree Curve - Outside Only $48.00 per Curve
#CGR-14 90 Degree Curve - Inside Only  $28.00 per Curve

Back To Top

Channel Guard Rail - Adjustable

Adjustable Channel Guard Rail price includes support bracket, support "L" rods, 2" x 1" x 12 gauge galvanized channel and all necessary mounting hardware. The galvanized channel adjusts in and out as well as up and down.
Model Description Price
#ADJ-11 Straight Section - Both Sides $6.40 per foot
#ADJ-12 Straight Section - One Side $4.00 per foot
#ADJ-13 90 Degree Curve - Outside Only $43.00 per curve
#ADJ-14  90 Degree Curve - Both Sides $67.00 per curve

Back To Top

Optional Color Charge

$150.00 net charge per order
Green Black Blue Gray Tan Off-White
Standard
Color
No Charge		 Optional
Color		 Optional
Color		 Optional
Color		 Optional
Color		 Optional
Color

Back To Top

D.C. Graves Co., Inc.      -      PO Box 583      -      Wakefield, MA 01880

US Phone  (800) 969-0779  International Phone  (781) 245-0300  Fax  (781) 245-8877

We Accept Visa, MasterCard, American Express & Government Purchasing Cards

Back To  -  Steel Skatewheel - Index