Home > Gravity Conveyors > Steel Roller Index > SR20 Index > SR20 Guard Rails
Galvanized Steel - Fixed Angle Guard Rail - "Toe-Out Design"
Bolt-on fixed angle guard rail "Toe-Out Design", constructed from 1.5" wide x 1.5" high or 1.5" wide x 2" high, 12 gauge galvanized angle with mounting hardware. Not designed to be used as toe-in.
1.5" Wide x 1.5" High
Galvanized Angle
SR20-FGR-1 Straight Conveyors
Both Sides
SR20-FGR-2 All Curves
Inside Only
SR20-FGR-3 All Curves
Outside Only
SR20-FGR-4 All Curves
Both Sides
1.5" Wide x 2.0" High
Galvanized Angle
SR20-FGR-1A Straight Conveyors
Both Sides
SR20-FGR-2A All Curves
Inside Only
SR20-FGR-3A All Curves
Outside Only
SR20-FGR-4A All Curves
Both Sides
Galvanized Steel - Fixed Angle Guard Rail - "Toe-In Design"
Bolt-on fixed angle guard rail "Toe-In Design", constructed from 1.5" wide x 1.5" high or 1.5" wide x 2" high, 12 gauge galvanized angle with mounting hardware. Toe-In design features counter sunk holes in angle and counter sunk bolts. This allows the top of the roller to be higher than the angle toe and its mounting hardware.
1.5" Wide x 1.5" High
Galvanized Angle
SR20-FGR-1-T Straight Conveyors
Both Sides
SR20-FGR-2-T All Curves
Inside Only
SR20-FGR-3-T All Curves
Outside Only
SR20-FGR-4-T All Curves
Both Sides
1.5" Wide x 2.0" High
Galvanized Angle
SR20-FGR-1A-T Straight Conveyors
Both Sides
SR20-FGR-2A-T All Curves
Inside Only
SR20-FGR-3A-T All Curves
Outside Only
SR20-FGR-4A-T All Curves
Both Sides
Galvanized Steel - Fixed Channel Guard Rail
Bolt-on fixed channel guard rail, constructed from 3.5" x 1.5" x 12 gauge galvanized channel with mounting hardware.
SR20-FCGR-1 Straight Conveyors
Both Sides
SR20-FCGR-2 All Curves
Inside Only
SR20-FCGR-3 All Curves
Outside Only
SR20-FCGR-4 All Curves
Both Sides
Galvanized Steel - Adjustable Channel Guard Rail
SR20-AGR-1 Straight Conveyors
One Side
SR20-AGR-2 Straight Conveyors
Both Sides
SR20-AGR-3 All Curves
Outside Only
SR20-AGR-4 All Curves
Both Sides
Adjustable channel guard rail price includes support brackets, "L" rods, and 2" x 1" x 12 gauge galvanized channel.