Wire Mesh Security Partition
Wire Partition - Safety, Security, and Separation
Wire partitions are modular steel systems that are used for safety, security, and separation. Mesh, welded or woven, is securely welded inside sturdy angle frames to create a single wire partition panel. These wire mesh partition panels are then bolted to square steel tubing posts to create a strong and rigid modular wall or enclosure.
DC Graves has years of experience designing and installing wire mesh security partitions and components for a multitude of applications across many industries. We can help you design and build the perfect industrial partitions systems to suit your needs. Please call us at 800-969-0779 to get started!!
Wire Mesh Partition - System Components
Constructed using 10 gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1 1/4" x 1 1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware.
These industrial partition panels stack on top of each other to create dividing wall. Stock panels are available in heights of 4' and 5' creating standard wall heights, of 8', 9', and 10'.
Constructed using 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.
Constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.
Constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8" x 2 3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly.
Please Call us at 800-969-0779 for Design and Pricing